The Electrical Tests and Electrical Measurements Laboratory performs numerous tests and measurements in Medium Voltage and Low Voltage Electrical Materials.
Main Tests
- Tests to Low Voltage electrical equipment (fuses, fuse bases, metering boxes, junction boxes, fuse boxes, relays, etc.).
- Test of tripping characteristic of micro circuit breaker
- Degree of Protection (IP) code: any material
- Capacity check of lead-acid batteries
- All kinds of electrical measurements (electrical resistance, voltage, power, resistance, Insulating properties tests, conductivity, etc.)
- Earthing resistance measurements
- Electrical aging tests to LV components.
- Dielectric tests up to 80kV
Main Equipment
- Electrical aging panels with Data acquisition and recording systems (temperature, electrical quantities, etc.)
- Battery capacity control devices
- Degree of Protection (IP) Devices.
- Climatic chamber with adjustable humidity - temperature
- Number of instruments measuring electrical quantities( Micro ohmmeters, Power Analysers, LCR meter, Insulating resistance meters, Voltmeters, Ampere meters, Power meters.
- Dielectric Strength Tester Up to 80KV.
Detailed Laboratory Tests and Standards Applied:
ELECTRICAL TESTS LABORATORY
| ASSEMBLING TEST OF TWISTED POWER CABLE'S INSULATED PIERCING CONNECTORS AT LOW TEMPERATURE (1 PAIR) (EN 50483) |
| ASSEMBLING TEST OF TWISTED POWER CABLE'S INSULATED PIERCING CONNECTORS AT LOW TEMPERATURE (2 PAIRS) (EN 50484) |
| ASSEMBLING TEST OF TWISTED POWER CABLE'S INSULATED PIERCING CONNECTORS AT LOW TEMPERATURE (3 PAIRS) (EN 50485) |
| ASSEMBLING TEST OF TWISTED POWER CABLE'S INSULATED PIERCING CONNECTORS AT LOW TEMPERATURE (4 PAIRS) (EN 50486) |
| TERMINAL CONNECTOR'S ELECTRICAL AGEING TEST OF A LV TRANSFORMER (50-100-160-250) KVA (4 OBJECTS) - (200 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| ELECTRICAL AGEING TEST OF ALUMINUM HEX COMPRESION TERMINAL CONNECTOR (4 OBJECTS) - (100 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| ELECTRICAL AGEING TEST OF ACSR CONDUCTOR'S HEX COMPRESSION TERMINAL CONNECTOR (4 OBJECTS) - (100 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| ELECTRICAL AGEING TEST OF TWISTED POWER CABLE'S INSULATED PIERCING CONNECTORS (4 OBJECTS) - (100 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| ELECTRICAL AGEING TEST OF POWER CABLE'S BIMETALLIC PARALLEL GROOVE CONNECTORS (4 OBJECTS) - (100 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| ELECTRICAL AGEING TEST OF POWER CABLE'S PARALLEL GROOVE CONNECTORS (4 OBJECTS) - (100 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| ELECTRICAL AGEING TEST OF TWISTED POWER CABLE'S INSULATED PIERCING CONNECTORS, ACCORDING TO THE FRENCH STANDARD (6 OBJECTS) - (200 CYCLES) (ΤΠΔΕΗ ΤΚ11.01) |
| TEST FOR PROTECTION AGAINST ACCESS TO SOLID FOREIGN OBJECTS INDICATED BY THE FIRST CHARACTERISTIC NUMERAL IP 2X, 3X, 4X (ΕΝ 60529) |
| TEST FOR PROTECTION AGAINST ACCESS TO SOLID FOREIGN OBJECTS INDICATED BY THE FIRST CHARACTERISTIC NUMERAL IP 5X (ΕΝ 60529) |
| TEST FOR PROTECTION AGAINST ACCESS TO SOLID FOREIGN OBJECTS INDICATED BY THE FIRST CHARACTERISTIC NUMERAL IP 6X (ΕΝ 60529) |
| TEST FOR PROTECTION AGAINST WATER INDICATED BY THE SECOND CHARACTERISTIC NUMERAL IP X3, X4, X5, X6 (ΕΝ 60529) |
| TEST FOR PROTECTION AGAINST WATER INDICATED BY THE SECOND CHARACTERISTIC NUMERAL IP X7 (ΕΝ 60529) |
| TEST FOR PROTECTION AGAINST WATER INDICATED BY THE SECOND CHARACTERISTIC NUMERAL IP X8 (ΕΝ 60529) |
| UP TO 80 KV DIELECTRIC TEST OF SOLID INSULATING MATERIALS AT POWER FREQUENCY (1 OBJECT) (IEC 60243-1) |
| UP TO 80 KV DIELECTRIC TEST IN SOLID INSULATING MATERIALS AT POWER FREQUENCY (5 OBJECTS) (IEC 60243-1) |
| UP TO 80 KV DIELECTRIC TEST IN LIQUID INSULATING MATERIALS AT POWER FREQUENCY (1 OBJECT) (IEC 60243-1) |
| UP TO 80 KV DIELECTRIC TEST IN LIQUID INSULATING MATERIALS AT POWER FREQUENCY (5 OBJECTS) (IEC 60243-1) |
| UP TO 80 KV DIELECTRIC TEST IN TAR AT POWER FREQUENCY (1 OBJECT) (IEC 60243-1) |
| UP TO 80 KV DIELECTRIC TEST IN TAR AT POWER FREQUENCY (5 OBJECTS) (IEC 60243-1) |
| DIELECTRIC TEST OF FOOTWEARS AT POWER FREQUENCY AT STANDARD ATMOSPHERIC CONDITIONS (1 OBJECT) (IEC 60243-1) |
| DIELECTRIC TEST AT POWER FREQUENCY UNDER PRESCRIBED ENVIRONMENTAL CONDITIONS (CLIMATIC TEST) (5 OBJECTS) (IEC 60243-1) |
| DIELECTRIC TEST AT POWER FREQUENCY UNDER PRESCRIBED ENVIRONMENTAL CONDITIONS (CLIMATIC TEST) (1 OBJECT) (IEC 60243-1) |
| INSULATION RESISTANCE MEASUREMENT TEST UNDER PRESCRIBED ENVIRONMENTAL CONDITIONS (CLIMATIC TEST) FOR PLASTIC ELECTRICAL BOXES (IEC 60502, KT 10.01/23.11.1990) |
| GLOWING WIRE TEST FOR PLASTIC ELECTRICAL BOXES (1 OBJECT) (IEC 60695-2) |
| NO LOAD VOLTAGE MEASUREMENT TEST FOR A LV TRANSFORMER (IEC 60076-1) |
| TRIPPING LIMIT VERIFICATION TEST OF CABLE AND OVERHEAD LINE SHORT-CIRCUIT AND EARTH FAULT PASSAGE INDICATOR (1 OBJECT) (ΔΔ-294/2009) |
| GLOWING WIRE TEST FOR MICROCIRCUIT BREAKER (1 OBJECT) (IEC 60898) |
| RESISTANCE TO TRACKING AND EROSION TEST OF ELECTRICAL INSULATING MATERIALS USED UNDER SEVERE AMBIENT CONDITIONS (IEC 60587) |
MEASUREMENT LABORATORY
| INITIAL CRANKING PERFORMANCE TEST OF A DRY-CHARGED LEAD-ACID BATTERY AFTER ACTIVATION I.E. FILLING ELECTROLYTE (EN 50342) |
| CAPACITY CHECK OF LEAD-ACID STARTER BATTERY (1 TEST) (EN 50342) |
| CRANKING PERFORMANCE TEST OF A LEAD-ACID BATTERY (1 TEST) (EN 50342) |
| TEMPERATURE RISE AND POWER DISSIPATION VERIFICATION TESTS OF 1 HAMMER FUSE-BASE AND 1 HAMMER FUSE (IEC 60269-2) |
| INSULATING PROPERTIES TEST OF A HAMMER FUSE-BASE (AT STANDARD ATMOSPHERIC CONDITIONS OR UNDER PRESCRIBED ENVIRONMENTAL CONDITIONS) (IEC 60269-2) |
| RESISTANCE TO HEAT VERIFICATION TEST (1 HAMMER FUSE-BASE) (IEC 60269-2) |
| TEST OF MECHANICAL STRENGTH (3 HAMMER FUSE-BASES) (IEC 60269-2) |
| TEST OF MECHANICAL STRENGTH AT ELEVATED TEMPERATURE (1 HAMMER FUSE-BASE) (IEC 60269-2) |
| MECHANICAL STRENGTH (3 FUSE-LINKS) (IEC 60269-2) |
| RESISTANCE MEASUREMENT AND NON-INTERCHANGEABILITY (12 HAMMER FUSES AND HAMMER FUSE-BASES) (IEC 60269-2) |
| RESISTANCE MEASUREMENT AND NON-INTERCHANGEABILITY (12 CYLINDRICAL FUSES) (IEC 60269-2) |
| VERIFICATION OF CONVENTIONAL NON-FUSING AND FUSING CURRENT (3 HAMMER FUSES) (IEC 60269-1) |
| CLIMATIC TEST OF CYLINDRICAL FUSES (IEC 60269-1) |
| INSULATION RESISTANCE MEASUREMENT OF ANTISTATIC FOOTWEARS IN DRY OR WET CONDITIONS (1 PAIR) (EN 20345, EN 20344) |
| RESISTIVITY MEASUREMENT OF LV CABLE (GR-45) |
| WIRE RESISTIVITY MEASUREMENT OF AN OVERHEAD ELECTRICAL STRANDED CONDUCTOR (GR-45) |
| RESISTIVITY MEASUREMENT FOR PIPE CONTACTOR OR BUSBAR (ΚΔΕΠ/ΤΗΔΜ) |
| CONDUCTIVITY MEASUREMENT OF PB (1 SAMPLE) (EN 12659) |
| CONDUCTIVITY MEASUREMENT OF PB (2 SAMPLES) (EN 12659) |
| CONDUCTIVITY MEASUREMENT OF PB (3 SAMPLES) (EN 12659) |
| OPERATION TEST OF REMOTE SOUND FREQUENCIES RECEIVER |
| AUXILIARY RELAY OPERATION TEST 0.8 - 1.1 IN (1 OBJECT) (IEC 60947) |
| AUXILIARY RELAY POWER DISSIPATION TEST AFTER COUPLING (1 OBJECT) (IEC 60947) |
| DC RESISTANCE MEASUREMENT OF AN OVERHEAD ELECTRICAL STRANDED CONDUCTOR (IEC 61089, GR-268, GR-86) |
| TEMPERATURE RISE OF THE CYLINDRICAL FUSE-HOLDER AND POWER DISSIPATION OF THE CYLINDRICAL FUSE-LINK VERIFICATION TESTS (1 OBJECT) (IEC 60269-1) |
| TEMPERATURE RISE AND POWER DISSIPATION VERIFICATION TESTS OF A MICRO CIRCUIT-BEAKER (1 OBJECT) (IEC60898) |
| VERIFICATION OF CONVENTIONAL NON-FUSING AND FUSING CURRENT (3 CYLINDRICAL FUSES) (IEC 60269-1) |
| TEST OF TRIPPING CHARACTERISTIC OF MICRO CIRCUIT-BREAKERS ≤ 63 A (12 OBJECTS 1-PH OR 4 OBJECTS 3-PH) (IEC60898) |
| TEST OF TRIPPING CHARACTERISTIC OF MICRO CIRCUIT-BREAKERS ≤ 63 A AT 2.5 OR 5 OR 10 IN (12 OBJECTS 1-PH OR 4 OBJECTS 3-PH) (IEC60898) |
| DIMENTIONAL AND VISUAL INSPECTION ON L.V. FUSE BASE. (IEC 60269-2) |